RAM 1500 DS 4250KG GVM/GCM UPGRADE BY MONSTER OFFROAD

We have been working extremely hard behind the scenes to get our 4250KG GVM/GCM on the market to suit the RAM 1500 DS PLATFORM and we are happy to finally release it to the public. We have set this kit out in 3 stages with the hope to please everyone.

As part of this kit we also address the unsatisfactory front axle load that is extreamly restricitive in a gvm upgrade situation while also having a bullbar and winch.

The front axle load is increased from 1770kg to 1860kg

The rear axle load is increased from 1770kg to 2450kg 

Thit kit features a complete replacement rear axle designed, built, and engineered right here in Victoria. We utilise the factory centre and get rid of the rest. Consists of 11mm thick wall tubes upgrading from the factory 7mm and entirely new beefed-up brackets.  Availability of bearings has been considered when developing this axle, that’s why we went with the good old Landcruiser bearings, you could almost say that they can be found anywhere in Aus. It is a full floating hub with chromoly axles. This is simply a Monster of a rear axle to go in the back of a 1500.

This axle is installed on a changeover basis.

THIS KIT IS FOR VEHICLES THAT ARE ALREADY REGISTERED AND CAN CONSIST OF UP TO 3 INCH LIFT AND 35 INCH TYRES

All our kits feature Fox Suspension, whether that it the 2.0 Performance Series or the 2.5 Factory Race DSC (Dual Speed Compression) Remote Reservoir Shocks. Fox are one of the world leaders in the suspension game and when it comes to the weight and size of the trucks that we are building, there is simply no other option. When doing a GVM upgrade you shouldn’t settle for anything less then Fox Suspension.

Another distinguishing factor of the Fox Series Shocks is its ability to be rebuildable, this means any Fox Shock can last the life of any vehicle.

POST REGO (NATIONALLY RECOGNISED)

PRE REGO (FEDERALLY APPROVED)   VTA-060855

Our Kit Prices Are All Inclusive DRIVE IN, DRIVE OUT

• Post Rego Engineering Certificate (VIC,NSW,SA,ACT,TAS)
• 100% Legal, Approved and Certified, Track Tested At 4560KG
• Fitting (LOCATED IN CASTLEMAINE VICTORIA)
• Wheel Alignment

We Flash The Vehicle To Amend The Issues Encountered When Fitting Larger Tyres

• Speedometer Correction

UPGRADED RIMS ARE A NECESSITY, FACTORY RIMS DO NOT SATISFY THE REQUIRED LOAD RATINGS. WE RECOMMEND 1350KG RATED RIMS AND ABOVE

RIMS WILL REQUIRE A 110MM CENTRE BORE

LIFT HEIGHTS CONSIST OF

3 Inch Lift

• 3 Inch Front (WITH UPPER CONTROL ARMS)
• 2 Inch Rear

STAGE 1

3 Inch Lift Fox Racing 2.0 Performance Series IFP Shocks

Ironman Upper Control Arms 

500kg Constant Load Springs 

Boss Airbag (Bump Stop Replacement)

Monster Offroad Replacement Rear Axle

• Arb Air Locker 
• New Ring & Pinion 
• New Pinion Flange
• New Wheel Studs

STAGE 2

3 Inch Lift Fox Racing 2.0 Performance Series IFP Shocks

Ironman Upper Control Arms

500kg Constant Load Springs 

Boss Airbag (Bump Stop Replacement)

Bushwacker Smooth Flares (SUIT 0 OFFSET WHEEL) STANDARD BLACK

Monster Offroad Replacement Rear Axle

• Arb Air Locker 
• New Ring & Pinion 
• New Pinion Flange
• New Wheel Studs

STAGE 3

3 Inch Lift Fox Racing 2.5 Factory DSC (Dual Speed Compression) Remote Reservoir Shocks

Ironman Upper Control Arms

500kg Constant Load Springs 

Boss Airbag (Bump Stop Replacement)

Bushwacker Smooth Flares (SUIT 0 OFFSET WHEEL) STANDARD BLACK

Monster Offroad Replacement Rear Axle

• Arb Air Locker 
• New Ring & Pinion 
• New Pinion Flange
• New Wheel Studs

NOTES:

WE REQUIRE A 50% DEPOSIT TO LOCK YOUR BUILD DATE IN

THIS KIT IS FOR ASV CONVERSIONS ONLY

VEHICLES MUST BE IN A ROADWORTHY STATE

COLOUR CODING ON FLARES IS AVAILABLE AT AN ADDITIONAL COST

KIT CUSTOMIZATIONS CAN BE MADE (PLEASE CONTACT US)