RAM 1500 DT 4300KG GVM UPGRADE BY MONSTER OFFROAD

We have been working extremely hard behind the scenes to get our 4300KG GVM on the market to suit the RAM 1500 DT PLATFORM and we are happy to finally release it to the public. We have set this kit out in 4 stages with the hope to please everyone.

The front axle load is increased from 1770kg or 1860kg with ram box to 1860kg 

The rear axle load is increased from 1770kg or 1860kg with ram box to 2500kg 

This kit features a complete replacement rear axle designed, built, and engineered right here in Victoria. We utilise the factory centre and get rid of the rest. Consists of 11mm thick wall tubes upgrading from the factory 7mm and entirely new beefed-up brackets. Availability of bearings has been considered when developing this axle, that’s why we went with the good old Landcruiser bearings, you could almost say that they can be found anywhere in Aus. It is a full floating hub with chromoly axles. This is simply a Monster of a rear axle to go in the back of a 1500.

This axle is installed on a changeover basis.

THIS KIT IS FOR VEHICLES THAT ARE ALREADY REGISTERED AND CONSISTS OF UP TO 3 INCH LIFT AND 35 INCH TYRES

All our kits feature Fox Suspension, whether that it the 2.0 Performance Series or the 2.5 Factory Race DSC (Dual Speed Compression) Remote Reservoir Shocks. Fox are one of the world leaders in the suspension game and when it comes to the weight and size of the trucks that we are building, there is simply no other option. When doing a GVM upgrade you shouldn’t settle for anything less then Fox Suspension.

Another distinguishing factor of the Fox Series Shocks is its ability to be rebuildable, this means any Fox Shock can last the life of any vehicle.

POST REGO (NATIONALLY RECOGNISED)

PRE-REGO (FEDERALLY APPROVED) VTA-060838

Our Kit Prices Are All Inclusive DRIVE IN, DRIVE OUT

• Post Rego Engineering Certificate (VIC,NSW,SA,ACT,TAS)
• 100% Legal, Approved and Certified, Track Tested At 4700KG
• Fitting (LOCATED IN CASTLEMAINE)
• Wheel Alignment

We Flash The Vehicle To Amend The Issues Encountered When Fitting Larger Tyres

• Speedometer Correction

UPGRADED RIMS ARE A NECESSITY, FACTORY RIMS DO NOT SATISFY THE REQUIRED LOAD RATINGS. WE RECOMMEND 1350KG RATED RIMS AND ABOVE

RIMS WILL REQUIRE A 110MM CENTRE BORE

LIFT HEIGHTS CONSIST OF

3 Inch Lift

• 3 Inch Front
• 2 Inch Rear

STAGE 1

3 Inch Lift Fox Racing 2.0 Performance Series IFP Shocks

500kg Constant Load Springs 

Boss Airbag (Bump Stop Replacement)

Ironman Upper Upper Control Arms

LED Auto Lamps CAT 6 Indicators (77ACM2) 

Monster Offroad Replacement Rear Axle

• Arb Air Locker 
• New Ring & Pinion 
• New Pinion Flange
• New Wheel Studs

STAGE 2

3 Inch Lift Fox Racing 2.0 Performance Series IFP Shocks

Ironman Upper Control Arms 

500kg Constant Load Springs 

Boss Airbag (Bump Stop Replacement)

Bushwacker Smooth Flares (SUIT 0 OFFSET WHEEL) STANDARD BLACK

LED Auto Lamps CAT 6 Indicators (77ACM2) 

Monster Offroad Replacement Rear Axle

• Arb Air Locker 
• New Ring & Pinion 
• New Pinion Flange
• New Wheel Studs

STAGE 3

3 Inch Lift Fox Racing 2.5 Performance Elite Series DSC (Dual Speed Compression) Remote Reservoir Shocks

Ironman Upper Upper Control Arms

500kg Constant Load Springs 

Boss Airbag (Bump Stop Replacement)

LED Auto Lamps CAT 6 Indicators (77ACM2) 

Monster Offroad Replacement Rear Axle

• Arb Air Locker 
• New Ring & Pinion 
• New Pinion Flange
• New Rear Brake Rotors
• New Wheel Studs

NOTE: BRACED REAR CHASSIS (DUE TO TWO DIFFERENT CHASSIS SUPPLIED FROM ASV, ONE WITH BRACING AND ONE WITHOUT. FACTORY BRACED VEHICLES WILL REQUIRE NO ADDITION CHASSIS WORK, UNBRACED VEHICLES WILL REQUIRE MONSTER OFFROADS CHASSIS BRACING)

NOTES:

WE REQUIRE A 50% DEPOSIT TO LOCK YOUR BUILD DATE IN

THIS KIT IS FOR ASV CONVERSIONS ONLY

VEHICLES MUST BE IN A ROADWORTHY STATE

COLOUR CODING ON FLARES IS AVAILABLE AT AN ADDITIONAL COST

KIT CUSTOMIZATIONS CAN BE MADE (PLEASE CONTACT US)