MONSTER OFFROAD RAM 1500 DT LARAMIE SPORT HURRICANE 4300KG GVM UPGRADE (POST REGO)

MONSTER OFFROAD RAM 1500 DT LARAMIE SPORT HURRICANE 4300KG GVM UPGRADE (POST REGO)

$28,720.00 AUD
$28,720.00 AUD
Sold out
Tax included.

RAM 1500 DT LARAMIE SPORT 4300KG GVM UPGRADE BY MONSTER OFFROAD

We have been working extremely hard behind the scenes to get our 4300KG GVM on the market to suit the RAM 1500 DT PLATFORM and we are happy to finally release it to the public. We have set this kit out in 2 stages with the hope to please everyone.


The front axle load is maintained at 1860kg 

The rear axle load is increased from 1860kg to 2500kg 

 

Born from the need for serious strength and off-road resilience, Monsters in-house engineered full-floating rear axle for the Ram 1500 is the ultimate upgrade for high-horsepower builds and off-road punishment. Inspired by the 700hp Ram TRX, this axle isn’t just tough—it’s engineered to dominate.

Key Features:

✅ Full-Floating Design

  • Engineered for maximum strength and serviceability under load.

  • Keeps the vehicle’s weight off the axle shafts for reduced stress and increased durability.

  • Supports vehicle weight independently of the axle shafts—ideal for towing, high-horsepower, and off-road applications.

  • Increased durability, serviceability, and peace of mind under stress.

✅ TRX-Inspired Architecture

  • Conceptual design and strength benchmarks based on the legendary 700hp Ram TRX.

  • Ideal for off-road and high-performance applications.

✅ Shared Wheel Bearings (Front & Rear)

  • Simplified maintenance and parts inventory.

  • Uses the same high-capacity wheel bearings front and rear for modularity and ease of replacement.

✅ Folded 5mm Steel Axle Bracing

  • Went through five design iterations before landing on our final bracing design.

  • Folded from 5mm steel and fully welded in for unmatched rigidity and long-term durability.

✅ 100% Monster HQ Engineered

  • Designed, tested, and fabricated entirely in-house.

  • Built by off-road and performance enthusiasts who actually use what they build.

This axle is installed on a changeover basis.

 

THIS KIT IS FOR VEHICLES THAT ARE ALREADY REGISTERED AND CONSISTS OF UP TO 3 INCH LIFT AND 34 INCH TYRES (295/70/18)

  

All our kits feature Fox Suspension, whether that it the 2.0 Performance Series or the 2.5 Factory Race DSC (Dual Speed Compression) Remote Reservoir Shocks. Fox are one of the world leaders in the suspension game and when it comes to the weight and size of the trucks that we are building, there is simply no other option. When doing a GVM upgrade you shouldn’t settle for anything less then Fox Suspension.

Another distinguishing factor of the Fox Series Shocks is its ability to be rebuildable, this means any Fox Shock can last the life of any vehicle.

 

POST REGO (NATIONALLY RECOGNISED)

PRE-REGO (FEDERALLY APPROVED) 

Our Kit Prices Are All Inclusive DRIVE IN, DRIVE OUT

  • Post Rego Engineering Certificate (VIC,NSW,SA,ACT,TAS)
  • 100% Legal, Approved and Certified, Track Tested At 4700KG
  • Fitting (LOCATED IN CASTLEMAINE)
  • Wheel Alignment

 

We Flash The Vehicle To Amend The Issues Encountered When Fitting Larger Tyres

  • Speedometer Correction

     

    UPGRADED RIMS ARE A NECESSITY, FACTORY RIMS DO NOT SATISFY THE REQUIRED LOAD RATINGS. WE RECOMMEND 1350KG RATED RIMS AND ABOVE

     

    LIFT HEIGHTS CONSIST OF

    3 Inch Lift

    • 3 Inch Front
    • 2 Inch Rear


     

    FIGURES 

    BEFORE

    AFTER

    INCREASE

    GROSS VEHICLE MASS

    3505KG

    4300KG

    795KG

    PAYLOAD

    785KG

    1578KG

    793KG

     

     

      STAGE 1

      3 Inch Lift Fox Racing 2.0 Performance Series IFP Shocks

      500kg Constant Load Springs 

      Boss Airbag (Bump Stop Replacement)

      Mevotech Upper Upper Control Arms

      Monster Front Chassis Bracing

      Monster Middle Chassis Bracing

      Monster Rear Chassis Bracing

      Monster Offroad Upgraded Rear Axle (WE UTILISE YOUR FACTORY HOUSING AND INTERNALS)

      • 2 x Monster Bearing End Flange
      • 1 x Monster DS/DT Axle Brace Kit
      • 2 x Monster ABS Tone Wheels (6x139.7)
      • 2 x Moser 300M Chromoly Axle Shafts
      • 2 x Mevotech BXT / Supreme Full Floating Unit Bearings
      • (LIMITED: MB25327     LARAMIE: MB25325)

        

      STAGE 2

      3 Inch Lift Fox Racing 2.5 Performance Elite Series DSC (Dual Speed Compression) Remote Reservoir Shocks

      Ironman Upper Upper Control Arms

      500kg Constant Load Springs 

      Boss Airbag (Bump Stop Replacement)

      Mevotech Upper Upper Control Arms

      Monster Front Chassis Bracing

      Monster Middle Chassis Bracing

      Monster Rear Chassis Bracing

      Monster Offroad Upgraded Rear Axle (WE UTILISE YOUR FACTORY HOUSING AND INTERNALS)

      • 2 x Monster Bearing End Flange
      • 1 x Monster DS/DT Axle Brace Kit
      • 2 x Monster ABS Tone Wheels (6x139.7)
      • 2 x Moser 300M Chromoly Axle Shafts
      • 2 x Mevotech BXT / Supreme Full Floating Unit Bearings
      • (LIMITED: MB25327     LARAMIE: MB25325)

       

       

      NOTES:

      WE REQUIRE A 50% DEPOSIT TO LOCK YOUR BUILD DATE IN

      THIS KIT IS FOR ASV CONVERSIONS ONLY

      VEHICLES MUST BE IN A ROADWORTHY STATE

      KIT CUSTOMIZATIONS CAN BE MADE (PLEASE CONTACT US)