RAM 1500 DT 3810KG TO 4300KG GVM UPGRADE BY MONSTER OFFROAD

PLEASE ALLOW 3 MONTHS IN ADVANCE OF BOOKING DUE TO THE CURRENT DEMAND 

We have been working extremely hard behind the scenes to get our 4300KG GVM on the market to suit the RAM 1500 DT PLATFORM and we are happy to finally release it to the public.  This kit is purely an upgrade from one of our already approved 3810kg kits.

The front axle load is increased from 1770kg or 1860kg with ram box to 1860kg 

The rear axle load is increased from 1770kg or 1860kg with ram box to 2500kg 

This kit features a complete replacement rear axle designed, built, and engineered right here in Victoria. We utilise the factory centre and get rid of the rest. Consists of 11mm thick wall tubes upgrading from the factory 7mm and entirely new beefed-up brackets. Availability of bearings has been considered when developing this axle, that’s why we went with the good old Landcruiser bearings, you could almost say that they can be found anywhere in Aus. It is a full floating hub with chromoly axles. This is simply a Monster of a rear axle to go in the back of a 1500.

This axle is installed on a changeover basis.

THIS KIT IS FOR VEHICLES THAT ARE ALREADY REGISTERED AND CONSISTS OF UP TO 3 INCH LIFT AND 35 INCH TYRES ON ONE OF OUR 3810KG GVM APPROVED UPGRADES

POST REGO (NATIONALLY RECOGNISED)

PRE-REGO (FEDERALLY APPROVED) VTA-060838

Our Kit Prices Are All Inclusive DRIVE IN, DRIVE OUT

• Post Rego Engineering Certificate (ALL STATES)
• 100% Legal, Approved and Certified, Track Tested At 4700KG
• Fitting (LOCATED IN CASTLEMAINE)
• Wheel Alignment

UPGRADED RIMS ARE A NECESSITY. FACTORY RIMS DO NOT SATISFY THE REQUIRED LOAD RATINGS. WE RECOMMEND 1350KG RATED RIMS AND ABOVE

RIMS WILL REQUIRE A 110MM CENTRE BORE

LIFT HEIGHTS CONSIST OF

3 Inch Lift

• 3 Inch Front
• 2 Inch Rear

STAGE 1

Installation & Engineering

Monster Offroad Replacement Rear Axle

• Arb Air Locker
• New Ring & Pinion
• New Pinion Flange
• New Wheel Studs
• New Rotors
• New Monster HD 600kg Springs

NOTE: BRACED REAR CHASSIS (DUE TO TWO DIFFERENT CHASSIS SUPPLIED FROM ASV, ONE WITH BRACING AND ONE WITHOUT. FACTORY BRACED VEHICLES WILL REQUIRE NO ADDITION CHASSIS WORK, UNBRACED VEHICLES WILL REQUIRE MONSTER OFFROADS CHASSIS BRACING)

BRACING ADDITIONAL $3000 FITTED    MORE INFO

NOTES:

WE REQUIRE A 50% DEPOSIT TO LOCK YOUR BUILD DATE IN

THIS KIT IS FOR ASV CONVERSIONS ONLY

VEHICLES MUST BE IN A ROADWORTHY STATE

COLOUR CODING ON FLARES IS AVAILABLE AT AN ADDITIONAL COST

KIT CUSTOMIZATIONS CAN BE MADE (PLEASE CONTACT US)